Installation: 2 1TB Hard Drives into Firewire RAID Enclosure

Twitter: twitter.com Website: tecpro.co.nr This is a video of me installing 2 1TB "1000GB" Samsung 7200RPM Hard Drives into the RAID+ Firewire 800 Enclosure which will be setup as a RAID 1 "Mirror" to keep all of my Data safe "Backed up" UNBOXING VIDEO: www.youtube.com Specs of the Hard Drive: Drive Configuration Capacity * 1TB Interface Serial ATA 3.0Gbps Buffer DRAM Size 32MB Byte per Sector 512 bytes Rotational Speed 7200 RPM Performance Specifications Average Seek time (typical) 8.9 ms Data Transfer Rate / Media to/from Buffer(Max.) 175 MB/sec Data Transfer Rate / Buffer to/from Host(Max.) 300 MB/sec Average Latency 4.17 ms Drive Ready Time (typical) 12 sec Reliability Specifications Non-recoverable Read Error 1 sector in 10^15 bits Start/Stop Cycles 50000 MTBF 1200000 POH Acoustics Idle 2.70 Bel Performance Seek 2.90 Bel Environmental Specifications Temperature / Operating 0 ~ 60 °C Temperature / Non-operating -40 ~ 70 °C Humidity (non-condensing) / Operating 5 ~ 90 % Humidity (non-condensing) / Non-operating 5 ~ 95 % Liner Shock (1/2 sine pulse) / Operating 70 G Liner Shock (1/2 sine pulse) / Non-operating 300 G Altitude (relative to sea level) / Operating -300 to 3000 m Altitude (relative to sea level) / Non-operating -300 to 12000 m Power Requirements Voltage +5V±5%, +12V±10% Spin-up Current (Max.) 2.4 A Seek (typical) 8.6 W Read/Write (typical) 7.9 W Idle (typical) 7.7 W Standby (typical) 0.8/1.2 W Sleep (typical) 0.8/1.2 W Physical Dimension Height (Max.) 26.1 ...

My Links : you can find more Cheap and Buy Direct from Amazon you can find more Cheap and Buy Direct from Amazon